1、Moisture proof and waterproof packaging of electronic and electrical accessories。
2、Insulation and fixing adhesive for electronic accessories。
3、Sealing of Automobile Headlamp Gaskets。
4、Adhesion and sealing of other metals and plastics。
5、Refrigerators, microwave ovens, circuit boards, electronic components, adhesive seals in the field of solar energy, and mechanical adhesive seals, etc。

  1、Clean the surface: Clean the surface of the adhesive or coated material and remove rust, dust, and oil stains。
2、Gluing: Unscrew (or cut) the cap of the rubber hose, squeeze the glue onto the cleaned surface, distribute it evenly, and fix the adhered surface together。
3、Curing: Place the components that have been glued or sealed in air for natural curing. The curing process is a process of curing from the surface to the inside. Within 24 hours (Room temperature 25 ℃ and 55% Relative humidity), the adhesive will cure to a depth of 2-4mm. If the position is deeper, the time will be extended. Before further processing or packaging the bonded components, it is recommended that users wait long enough to ensure the firmness and integrity of the adhesive are not affected. It takes more than 7 days for the 6mm thick sealant to fully cure. Note: It is recommended to use Opert dual components products for potting with a thickness greater than 5mm。

 After the operation is completed, the unused adhesive should be immediately tightened and sealed for storage.When reusing, if there is a slight crust at the sealing area, it can be removed without affecting normal use.胶在贮存过程中，管口部也有可能出现少量的固化现象，将之清除后可正常使用，不影响产品性能。
The data in this article is measured in the laboratory of the R&D Center of Shenzhen Oupute Industrial Materials Co., Ltd. and is believed to be reliable. Opert Company is not responsible for the results obtained by anyone using methods beyond our control; It is the responsibility of the user to decide which production method to use this product in and which measures to take to prevent potential losses and personal injuries during storage and use of the product. Given this, our company explicitly declares that it does not guarantee any issues arising from the sale of our products or the use of our products in specific situations. Our company explicitly declares that we are not responsible for any indirect or accidental losses, including losses in terms of profits. The various production processes or chemical components discussed in this article cannot be understood as products that can be easily used and owned by others. It is recommended that users conduct experiments based on the data provided in this article before formal use.

  1、This product needs to be stored in a cool and dry environment below 25 ℃, with a storage period of 6 months below 25 ℃。
2. This type of product belongs to non hazardous goods and can be transported as general chemicals.
3、Products that have exceeded their shelf life should be confirmed for any abnormalities before use。